panel dividing saw with loading table and stacking device

panel dividing saw with loading table and stacking device
Brand: Giben
Type: Prismatic 2 h100 SPT
Year of manufacture: 1999


Technical data
- Usable cutting length: 1600 mm
- Saw blade projection: 100 mm
- Collet opening: 117 mm
- Working height: 950 mm
- Lifting table dimensions: 1600 x 2700 mm
- Max. Stacking height: 620 mm
- Dimensions: 2444 x 1220 mm, 2500 x 1250 mm
- Panel thickness: 6 - 22 mm (+/- 1 mm tolerance per and within a panel)

High-speed saw carriage
- 2 guide shafts: Ø 40 mm
- Saw carriage drive via frequency-controlled motor
- Feed speed: 1 - 100 m/min
- Return speed: 100 m/min
Saw carriage speed adjustment from the control panel.
Automatic cutting length control according to the panel dimensions
- Scoring unit speed: 5035 rpm
- Carbide saw blade speed: 3760 rpm
- Main saw motor power: 11 kW
- Scoring unit motor power: 2.2 kW
- Main saw blade Ø: 400 mm
- Main saw shaft Ø: 75 mm
- Scoring blade Ø: 215 mm
- Scoring adjustment from the outside in increments of: 0.025 mm
- Changing the main saw and scoring blade via quick clamping system (pneumatic)

Slider
- Support table in the pusher area with free-running roller rails
- Upper pusher with 3 floating collets with patented, foldable lower collet fingers
- Slider drive via servo motor
- Drive torque: 6.5 Nm
- Feed speed: 1 - 60 m/min
- Return speed: 60 m/min
- Cable guide via trailing cable
- 2 frontal aligners

Automatic loading via lifting table
- Dimension: 1600 x 2700 mm
- 4-column spindle lifting table with 12 free-running roller groups
- Automatic package height counting when lifting the panels via control system
- min. panel dimensions: 2000 x 1200 mm
- max. stacking height without pit: 620 mm
- max. load: 12 t
- Infeed height: 330 mm

Support table
- 2 pcs. support table with PVC covering 2000 x 510 mm

Machine control G-Drive 1D

Extraction
- 1 extraction nozzle on the pressure beam: 115 mm
- 1 extraction nozzle at the bottom side of the machine bed: 200 mm
- Chips are extracted directly at the sawing unit via sheet metal ducts into a chip channel arranged along the sawing line, which is sealed with flexible rubber lips.

Performance parameters
- Average cycle time/saw cut: approx. 25 s

cutting quality
- Cutting accuracy: +/- 0.15 mm is guaranteed (for straight panels)
- Angularity: +/- 0.15 mm/m



Note:
The technical data and descriptions are a copy of the order confirmation at that time. Data are for information and are not binding.