- Release agent application top and bottom
- Scoring saw with 2.2 kW motor
- Rough trimming unit with 8.0 kW motor
- Double milling unit with 2 motors, each 4.5 kW
- Gluing unit for hot-melt adhesive
- End trimming unit
- Flush milling unit
- Multifunction unit
- Multi-profile scraper unit
- Spray nozzles top and bottom
- Flat scraper unit
- Buffing unit
- Grooving unit

- 3-axis machining
- Computer new in 12/2023
- New axis control in 2018
- Working size: approx. 120 x 280 cm
- main spindel 8,0 KW, 24000 rpm
- 12-slot changer

- Veneer strip lengths (grain direction): 350 - 2150 mm
- Veneer strip widths ( cross grain direction): 50 - 600 mm
- Veneer face width (cross grain direction): min. 260 mm
- Veneer strip thickness: 0,3 - 1,5 mm

- Cutting length: 2810 mm
- Insertion height: 80 mm
- Cutting range: 20 - 470 mm
- Drawing motion of knives approx.: 20°

- Max. cutting length: 2600 mm
- Cutting widths: 45 - 350 mm
- Pressure beam opening: 100 mm
- Pressure beam width: 350 mm
- Parallel fence with digital read-out: 25 - 1000 mm
- Cutting angle approx.: 45°

- Veneer strip lengths (grain direction): 350 - 1500 mm
- Veneer strip widths (cross grain direction): 50 - 500 mm
- Veneer strip thickness: 0,3 - 1,5 mm

- Veneer strip lengths (grain direction): 350 - 1500 mm
- Veneer strip widths (cross grain direction): 50 - 500 mm
- Veneer face width (cross grain direction): min. 260 mm
- Veneer strip thickness: 0,3 - 1,5 mm

Lacquering of narrow edge surfaces
Put into operation: 2021
Purpose: to spray edges of furniture panels located in stacks.

Specifically designed for the precise cutting and processing of wooden components in timber construction and carpentry.
Functions of the K2-5-450:
- Automatic crosscutting (cutting to length)
- Milling, drilling, and slotting

Consisting of:
- Infeed unit
- 1. Throughfeed Drilling Machine
- 2. Throughfeed Drilling Machine
- Stacking Unit

- Jointing cutter
- Radiant heater
- EVA gluing unit
- Roll magazine for edge material
- Cutting unit
- Flush milling top/bottom
- MFA with 2 motors for radius r2, servo-controlled
- Profile scraper unit
- Surface scraper unit
- Buffing unit
- Feed speed 20 m/min

- premilling unit
- gluing unit
- Pre-melting unit
- end cutting unit
- tiltable trimming unit
- rounding unit
- edge scraping unit
- brushing unit

- working withd 1.350 mm
- Belt feed speed 2 to 16 m/min
- PRO SAND electronic control

For door dimensions:
- Lengths: 1,800 - 2,300 mm
- Widths: 500 - 1,300 mm
- Thicknesses: 35 / 40 / 44 mm

- Panel size: 3,500 x 1,400 mm
- Stroke: from bottom to top
- Maximum total lifting force: 110 tons

CSMA pull-out device
- Drive power: 4 x 4 kW
- Feed speed: 85 m/min

VZM centering device
- Drive power: 2 x 7.5 kW
- Feed speed: 84 m/min

- joint milling
- Gluing section with glue premelter
- Pressure zone
- Snipping unit
- Flush trimming
- Contour trimming unit FK 13 with automatic tool changer 8-fold
- Groove trimming unit
- Profile scraper
- Surface scraper
- Buffing unit
- Homatic NC 21 control unit

Travels
- X-axis: 2450 mm
- Y-axis: 1400 mm
- Z-axis: 800 mm

The JJZ-CP press is suitable for the production of plywood, doors, and MDF panel joints. The glued elements are fed and removed automatically via driven roller conveyors.

- Jointing milling unit with 2 motors, each 4.5 kW
- Infrared heater, approx. 300 mm long, 2 x 1.5 kW
- Gluing unit
- Vertical roll holder for 32 rolls
- End trimming unit on top pressure beam with 2 motors, each 200 W
- Milling unit with 2 motors, each 1000 W
- Multi-functional processing unit 2 motors 660 W
- Spray nozzles top and bottom
- Multi-profile scraper unit
- Flat scraper unit
- Copy buffing unit 4 motors 250 W
- Smoothing unit

Processing speeds per axis:
- max. 90 m/min on the X-axis
- max. 30 m/min on the Y-axis
- max. 15 m/min on the Z-axis

The line consists of:
• SORBINI Smartcoater SP1 coating rollers, built in 2009, approximately 3,000 operating hours
• SUPERFICI model 2UVPLUS65 UV lamps, built in 1998, mounted on a VENJAKOB conveyor belt, built in 1998, average operating hours: 8,500
Max. element width: 1,300 mm

- 4-axis milling spindle 7,5 KW 8000-24000 rpm, with automatic 18-fold rotation changer.
- 3-axis milling spindle 4 Kw. 7500-12000 rpm, with manual tool changer
- HSK 63F
- volautomatic set-up table
- safety tread mats
- IMAWOP 6.0
- Machining range X = 3000 mm
- machining range Y = 1200 mm

- Release agent specification top/bottom
- Joining unit and blow nozzle
- Cutting unit
- Copy trimming unit SKF-L
- Profile scraper unit
- Spray cleaning agent
- Self-scanning scraper unit
- Buffing unit

- 2 motors 11 kw (15 hp) each
- productivity max 850 kg/hour
- upper opening 1220×1020 mm
- lower opening 562×462 mm
- cutting knives diameter 235 mm

- 4 rollers
- Working width: 1400(1350) mm

- Cutting length: 4200 mm
- Cutting width: 4200 mm
- APA - quick clamping system Cutting height: max. 72 mm
- Main saw motor (15 HP): 11 kW
- Scoring saw motor (3.0 HP): 2.2 kW

- Joint trimming unit
- Gluing unit
- Snipping unit
- Pre-milling unit
- Shaping trimming unit
- Profile scraper blades
- Surface scraper blades
- Buffing unit
- Grooving unit