The system consists of:
- Feeder
- Transport table with a cleaner
- Spray coating machine
- Drying tunnel with IR lamps, 2 pieces
- UV tunnel
- Roller conveyor
- Turntable
- Transport table
- Transport table with a cleaner
- Spray painting machine
- Drying tunnel with IR lamps, 2 pieces
- UV tunnel
- roller conveyor

The system consists of:
- Feeder
- Transport table with a cleaner
- Spray coating machine
- Drying tunnel with IR lamps, 2 pieces
- UV tunnel
- Roller conveyor
- Turntable
- Transport table
- Transport table with a cleaner
- Spray painting machine
- Drying tunnel with IR lamps, 2 pieces
- UV tunnel
- roller conveyor

- Press dimensions: 2500 x 1500 x 600 mm

- Machining range X= 3700 Y=2100 Z= 200
- 9 kW IOX spindle
- 12-fold linear traveling tool changer
- 9 vertical drilling spindles, SCM gearbox

Workpiece dimensions
- Length: 220 cm
- Width: 150 cm
- Height: 35 cm

Sanding unit equiment:
Q / Q / L / L / L / L / Brush / Brush

- Processing range X: 4200 mm
- with standard units Y: 1200 mm
- Tool holder: HSK F63
- Design: disk changer
- Magazine places: 18

consisting of:
4 x Screw compressor
2 x Refrigeration dryer
1 x Pressure tank

- Mass m: 140 kg
- Throughput: 4200 kg/h
- Bulk density: 199 kg/m³

Power of the 5 shafts:
- bottom: 4 Kw
- right / left: 7.5 Kw
- top: 7.5 Kw
- bottom: 4 kW

- With workpiece return
- Maximum edge thickness: 20 mm
- Panel thickness: 8-60 mm
- Maximum feed rate: 20 m/min
- With grooving unit

- working width: max. 200 mm
- working height: max. 40 mm
- workpiece length: min. 1000 mm
- feed speed: 20 m/min

Sanding belt width: 300 mm
Sanding belt length: 1800 mm
Max. working height: 200 mm Working height: 200 mm
Feed speed: 6 / 11 / 16 m/min

Working width 1100 mm
Working height max. 200 mm
Sanding roller
Sanding pads for lacquer sanding
Belt cleaning

Combined sawing unit with
Cross cutting aggregate with cutting length 1.600 mm and with
Depth cutting aggregate with cutting length 5.600 mm

With vacuum feeding device and outfeed roller conveyor

carcass dimensions:
Length: min. 300 mm / max. 2300 mm
Height: min. 300 mm / max. 1220 mm
Depth: max. 600/800/1000 mm (depending on press type)

- Usable cutting length: 1600 mm
- Saw blade projection: 100 mm
- Panel thickness: 6 - 22 mm (+/- 1 mm tolerance per and within a panel)

consisting of:
- double-end tenoner Gabbiani
- Angle transfer between DET and planer
- Automatic planer Weinig

consisting of:
- Portal loading system PBA-52M
- BMA-DLS-CNC drilling and assembly system
- BAD-DTW-CNC drilling and assembly system
- Feeding and buffer section
- Automatic glue application LA - CNC
- Feeding and turning device ZWA-1-CNC
- KP-6-CNC Carcass press

Consisting of:
- Feeding and transport
- Milling machine combination with glue application
- Transfer station
- Threading station
- press station with unloading

- Press table: 3000 x 1400 mm

- Working range X: 6175 mm
- Working range Y: 1900 mm
- Working range Z: 300 mm
- Tool changing stations: 30

- Panel length: 4.5 m
- Plate height: 2.2 m
- without scoring unit

- Machining range with standard units: X 3000 mm, Y 1000 mm

- Worktable length: 3100 mm
- Work table width: 1550 mm
- Workpiece thickness: max. 80 mm
- Tool holder: HSK63